Furnace repair and replacement
Ignitors, flame sensors, blower motors and cracked heat exchangers on gas and electric furnaces, plus full replacements when the unit is past saving.
See furnace repair optionsNo heat on a 10 degree night, a condenser that quit in a July heat wave, or a heat pump that will not come out of defrost: we diagnose it, fix it or replace it, and we pick up the phone at any hour.

Quick answerFor heating and cooling repair in Spokane, WA, call Abrahamson's Air at any hour and a technician will diagnose the furnace, air conditioner or heat pump, quote the repair before starting, and replace the system only when a repair no longer makes sense. Service runs from the north side office on N Florida St, with a head office in Omak.
Spokane homes run a furnace for eight months and an air conditioner or heat pump for two, so most of our calls are about heat. The rest of the catalog is here because a house needs all of it at some point.
Ignitors, flame sensors, blower motors and cracked heat exchangers on gas and electric furnaces, plus full replacements when the unit is past saving.
See furnace repair optionsCapacitors, contactors, frozen coils and refrigerant leaks on central AC, and new installs for the many Spokane homes that never had cooling.
See ac repair optionsCold-climate heat pumps, dual-fuel setups and ductless mini-splits for basements, additions and homes with electric baseboard heat.
See heat pump installation optionsMedia filter cabinets, whole-house purifiers and humidifiers that deal with August smoke and dry January air.
See indoor air quality optionsDuct sealing and repair in crawlspaces and attics, and smart thermostats wired correctly for heat pumps.
See duct repair and sealing optionsRooftop units, split systems and no-heat calls for restaurants, offices and retail across Spokane and the Valley.
See commercial hvac repair optionsFall furnace inspections with a carbon monoxide check, and spring AC startups before the first 90 degree day.
See furnace tune-up optionsSpokane averages 132 frosty nights a year and about 34 days that never climb above freezing, and every one of them is a furnace running near its limit. The failures we see in December are the ones that started as a weak ignitor or a dirty flame sensor in October, which is why the fall tune-up is the cheapest heating call of the year.
Summer is short but it bites. July normals sit around 84 degrees and 2026 ran almost three degrees warmer, with 96 and 97 degree afternoons in July and August. Air conditioners that limped through last year fail on those days, and heat pumps sized for mild weather run flat out.
The housing stock matters too. Inside the city the median home dates to 1961 and about a quarter were built before 1940, so we work around undersized returns, gravity-furnace ducts and homes that never had central air. Out on Five Mile Prairie and across newer parts of Spokane County, the 2000s-era heat pumps and furnaces are now reaching the age where repairs start stacking up.

Cold air, short cycling, a tripped breaker, an outdoor unit iced over. Thirty seconds on the phone tells us what to bring.
You get a real arrival window, and a call when the technician is on the way, day or night.
The technician tests the system, shows you the failed part or reading, and explains the options.
You approve a price before any part is replaced. No surprises when the work is done.
When a repair costs more than a third of a replacement, or the unit is past 15 years, we say so and quote both.
Replacements get the Washington mechanical permit and the rebate forms filled in where a program applies.
We run the system through a full cycle, clean the work area and show you what changed.
The phone is live around the clock, every day of the year, because no-heat calls do not wait for business hours.
We fix the part that failed. We recommend replacement when age, refrigerant type or repair cost makes fixing it a bad deal, and we show the math.
New furnaces and heat pumps get a load calculation, not a copy of whatever size was there before.
Trucks roll from the north side of Spokane, so the Valley, the South Hill and the north suburbs are minutes away rather than an afternoon.
Day-to-day dispatch runs from our service office at 5104 N Florida St in Hillyard, which puts the north side, downtown, the South Hill and Spokane Valley within an easy drive. Our head office sits in Omak, so Okanogan County customers reach the same crew on the same number. The service area page spells out where we go and where coverage ends.

Yes. The line is answered 24 hours a day, seven days a week. Tell the person who answers what the system is doing and you will get an arrival window, not a promise to phone in the morning.
If the furnace is under about 12 years old and the repair is a common part like an ignitor, blower motor or control board, repair is usually the right call. A cracked heat exchanger, a unit past 15 years, or a repair over a third of the replacement cost tips it toward replacement. We quote both so you can decide.
A cold-climate heat pump can, and a dual-fuel setup with a gas furnace as backup is the safest bet for the nights that drop below zero. A standard heat pump on its own struggles here, which is why we do not sell them as the only heat source.
Yes. Washington requires a mechanical permit for HVAC replacement, including like-for-like swaps. Spokane residential permit fees typically run about $75 to $300. We pull it and schedule the inspection.
Cost data tracked for Spokane projects shows the furnace itself at roughly $650 to $1,500 for a typical 80,000 BTU unit, with installation labor of about $1,800 to $4,000 depending on venting, ductwork changes and efficiency. That is a planning range from published sources, not a quote; the on-site estimate is the real number.
All of the common residential brands, including Carrier, Trane, Lennox, Bryant, Rheem, Goodman, Daikin and Mitsubishi Electric. Parts for most of them are on the truck or a short drive away.
Call now for a furnace, AC or heat pump technician in Spokane, WA.
